1. JP14 Clear CMOS You can clear CMOS to restore system default setting. To clear the CMOS, follow the procedure below. 1. Turn off the system and unplug the AC power. 2. Remove ATX power cable from connector PWR2. Everything you need to boot this 3.
Sensor <Home> key to restore the Pentium III 667EB 667MHz 133MHz default setting or you can wait Pentium III 733EB 733MHz 133MHz AOpen “Watch Pentium III 800EB 800MHz 133MHz Timer” reset the system in Pentium III 866EB 866MHz 133MHz five seconds and system will...
6. JP23 FSB/PCI Clock Ratio 8. Connecting IDE and Floppy Cables This jumper is used to specify the relationship of PCI and FSB clock. Generally speaking, if Connect 34-pin floppy cable and 40-pin IDE cable to floppy connector FDC and IDE you are not overclockers, we recommend you to set at the default setting.
10. Support 2 USB Port 12. Connecting CD / MODEM / AUX Connector This motherboard provides four connectors to connect USB devices, such as mouse, CD-IN (Black) The CD-IN connector is used to connect CD Audio keyboard, modem, printer, etc. There are two connectors on the PC99 back panel. You cable from CDROM or DVD drive to onboard sound.
15. AOpen Bonus Pack CD 17. BIOS Upgrade AOpen Easy Flash is more user-friendly than traditional flash method. The BIOS binary You can use the autorun menu of Bonus CD disc. Choose the utility and driver and select file and flash routine are combined together and you simply run a single file to complete model name.
It is very possible that your keyboard press Del to see if the is defective. system reboots. AX3SPPU R1.00 Feb. 01. 2001 AOpen Inc. Award Plug and Play BIOS Extension v1.0A During system rebooting, press Del to enter BIOS Setup. Choose “Load Setup Default".
Page 8
Dear Customer, Test Report: We recommend to choose board/card/device from the Thanks for choosing AOpen products. To provide the best and fastest service to compatibility test reports for assembling your PC. our customer is our first priority. However, we receive numerous emails and http://www.aopen.com.tw/tech/report/default.htm...