How To Enter The Bios Setup - AOpen NMCP68ST Manual

Key
Page Up or +
Page Down or -
Enter
Esc In main menu
In sub menu
Up Arrow
Down Arrow
Left Arrow
Right Arrow
F6
F7
F10

3.3 How to Enter the BIOS Setup

After fi nishing the jumper settings and connecting cables, you can power on
and enter the BIOS Setup. Press <Del> during POST (Power-On Self Test) and
choose "Load Fail-Safe Defaults" for recommended optimal performance.
Caution:
Description
Change setting to next value or increase the value.
Change setting to previous value or decrease value.
Select the item.
Quit without saving any changes.
Exit current menu to main menu.
Highlight previous item.
Highlight next item.
Move the light bar to left side of menu.
Move the light bar to right side of menu.
Load Setup Default setting value from CMOS.
Load turbo setting value from CMOS.
Save changed settings and exit setup program.
Please avoid of using "Load Optimized Defaults", unless you are certain
your system components (CPU, SDRAM, HDD, etc.) have been proven
acceptable for use.
22