AOpen NMCP68ST Manual page 34

3.7 Power Management Setup
The Power Management Setup screen enables you to control the motherboard
green features.
Power Management > ACPI Suspend Type
The function allows you to select suspend types. S1 is power On Suspend and
S3 is Suspend to RAM,Available Options : S1,S3 & S1 & S3
Power Management > Soft-Off by PBTN
This is a specifi cation of ACPI and supported by hardware. When Delay 4 sec.
is selected, the soft power switch on the front panel can be used to control
power On, Suspend and Off. If the switch is pressed for less than 4 seconds
during power On, the system will go into Suspend mode. If the switch is
pressed for longer than 4 seconds, the system will be turned Off. The default
setting is Instant-Off. If Instant-Off is selected the soft power switch is only used
to control On and Off, so there is no need to press it for 4 seconds, and there is
no Suspend.
Available Options: Delay 4 sec., Instant-Off
Power Management > WOL(PME#) From Soft-Off>
This is a function of PCI specifi cation 2.2. PCI bus supports standby current to
PCI card and PCI card can wakeup system if it detects certain activity.
Available options: Disabled, Enabled
28