Creating Line Image; Using The Scanning Frame To Create A Pattern With Line Scan - Baby Lock Destiny BLDY Instruction And Reference Manual

CREATING LINE IMAGE

Custom patterns can be created from drawings.
You can create patterns by scanning your
drawings using the included scan frame or
importing an image from USB media or a
computer.
Recommended line drawings for Line Scan
• Line drawings must be drawn clearly using lines
with approximately 1 mm thickness.
• Line drawings should be drawn in a strong
contrast.
• If the lines are too short or gathered in small
space, they will not be scanned correctly.
Note
• For details on creating patterns using color
illustrations, refer to "CREATING FILL
IMAGE" on page 342.
• If you cannot scan the drawings as
expected, you can edit the design in the IQ
Designer. Refer to "PATTERN DRAWING
SCREEN" on page 326.
• Line drawings are scanned without
recognizing the thickness of lines. If you
want to change the thickness of lines,
specify in the Settings screen. Refer to
"STITCH SETTINGS SCREEN" on
page 332.
• Line drawings are scanned as black lines. If
you want to change the colors, specify in
the IQ Designer. Refer to "Drawing
Regions" on page 328.
Using the Scanning Frame to
Create a Pattern with Line Scan
a
Press .
* You can also start the function by pressing
in "Embroidery" mode.
b
Press
→ The image display screen appears.
c
Press .
* To import an image from USB media or a computer,
press ,
refer to page 338.
* If you scan the image, make sure that the scan frame
is attached to the machine. Refer to "Using the Scan
Frame" on page 335.
CREATING LINE IMAGE
.
or . For details,
7
339