Baby Lock Destiny BLDY Instruction And Reference Manual page 200

Problem
Loops appear on the The thread tension is incorrectly set.
surface of the fabric
The tension of the upper thread is incorrectly
when embroidering
set for the combination of the fabric, thread
and pattern being used.
The combination of the bobbin case and
bobbin thread is incorrect.
• This machine is equipped with a thread detection device. If the "Start/Stop" button is pushed before the
upper threading is done, the machine will not operate properly. Also, depending on the pattern selected,
the machine may feed the fabric even if the needle is raised. This is due to the needle bar release
mechanism. At these times, the machine will make a sound different from what is made during normal
sewing. This is not the sign of a malfunction.
• If the power is disconnected during sewing:
Turn the main power to OFF and unplug the machine.
If you restart the machine, follow the instructions for operating the machine correctly.
Cause
Adjust the thread tension.
Use the embroidery needle plate cover.
Change the bobbin case or bobbin thread so
that the correct combination is used.
CAUTION
TROUBLESHOOTING
Solution Page
287
260
259
9
393