Gas Conversion - Majestic DV360 Homeowner's Installation And Operating Manual

Center
Plunger
Blue - NG
Red - LP
Fig. 68 Depress and turn center plunger.
Manifold Assembly
Manifold Mounting
Screw
Orifice
Fig. 69 Remove manifold assembly.
Rear Burner Orifice:
(Refer to Conversion
Kit Orifice Chart)
Fig. 70 Burner orifice replacement.
Burner Pan
CO102a
Shutter
Retaining
DV360/580
Screw

Gas Conversion

1/28/00 djt
Air
Shutter
Front View
CO103
Fig. 71 Remove air shutter from burner pan.
Gas Conversion
Air shutter
2/15/99 djt
10006357
Motor Top Cap
FP1037b
Pilot Location
Burner Pan
FP1037b
comfort valve
convert
3/6/01 djt
Log Support
(DV580)
CO101a
CO101a
DV360/580
Gas Conversion
Manifold
1/28/00
added manifold screw
4/7/00 djt
Front Burner Orifice:
(Refer to Conversion Kit
Orifice Chart)
CO102a
CO103
DV360/580 Series Direct Vent Gas Fireplace
10.Reinstall manifold mounting screw.
NOTE: It is not necessary to remove the pilot tube for
conversion.
11. Loosen pilot hood turning counterclockwise using a
OFF
•
7/16" wrench. (Fig. 72)
12. Remove pilot orifice with needlenose pliers. (Fig.
73)
13. Install conversion pilot orifice.
14. Reinstall pilot hood. Be sure to align pilot hood with
index marks.
Index
Marks
Pilot
Bracket
Fig. 72 Remove pilot hood.
Fig. 73 Remove pilot orifice.
15.Turn the gas supply valve and gas valve on and test
for leaks. Use a 50/50 solution of liquid soap and
water to test for leaks at gas fittings and joints. Apply
water/soap solution with brush only - do not over ap-
ply. NEVER test with an open flame.
16.Follow procedure on rating plate to light the pilot.
Check for leaks.
17.Turn main burner on and check for leaks.
18.Install logs. Refer to Page 25 for proper log place-
ment.
Installation complete.
Pilot Hood
CO105
CO105
Gas Conversion
Pilot
2/15/99 djt
Pilot
Orifice
CO106
CO106
Gas Conversion
Pilot2
2/15/99 djt
39