Table of Contents
Advertisement
Operating Environment
Temperature
Relative Humidity
Certification
Section 1: Hardware Installation
This section covers the following topics:
1. Setting up the Enclosure
2. Setting up the HBA (Host Bus Adapter)
3. LED Activity
Preparing the Enclosure
You can refer to the NetStor 2U 8-Bay Rackmount Quick Installation Guide for details
on how to set up the enclosure.
1. Take out the HDD tray and place your hard drive in the tray as shown below. Then
install the tray back into the enclosure. Repeat for all your hard drives.
2. Optional) Lock your HDD tray with the included disk tray key.
3. Place the enclosure on a server rack or another stable, flat surface.
4. Connect the enclosure to a power source with the AC Power Cord.
5. Connect the enclosure to the included RocketRAID 4522 using the mini-SAS to
mini-SAS cable (SFF-8088).
Preparing the HBA (Host Bus Adapter)
The following instructions describe how to prepare your RocketRAID 4522 HBA for use.
To install your RocketRAID 4522:
(operating) 5° C – 45° C
(non-operating) -40° C – 65° C
(operating) 8% – 90% RH (Non-condensing)
(non-operating) 5% – 95% RH (Non-condensing)
CE, FCC, RoHS
8
Advertisement
Table of Contents
