Step 1: Setting Up The Hardware - HighPoint RocketStor 6414TS User Manual

Hide thumbs Also See for RocketStor 6414TS:

Table of Contents

5. Initialize and format RAID Volumes (pg. 24)

Step 1: Setting Up the Hardware

Ensure all items listed under Kit Contents are included in your package. For any

discrepancy contact your reseller or submit a support ticket online at

tech.com/websupport.

Preparing the Enclosure

1. Press then pull the blue tab on the disk tray to unlock and slide the disk tray out.

Mount your hard drives onto each tray using the provided screws. Repeat for up to

four hard drives.

3.5" HDD Mounting Holes

2. Place the enclosure upright on a stable, flat surface

3. Connect the enclosure to a power source with the AC Power Cord.

4. Connect the enclosure to the included RocketRAID 2711 using the mini-SAS to

mini-SAS cable (SFF-8088).

Preparing the HBA (Host Bus Adapter)

The following instructions describe how to prepare your RocketRAID 2711 HBA for use.

To install your RocketRAID 2711:

Important: Before installing the RocketRAID 2711 Controller, ensure that your system

is powered OFF.

1. Locate a PCIe 2.0 x8 slot (or compatible slot) on your PC motherboard.



Note 1: Refer to your PC manual for instructions on how to access your

motherboard.

www.highpoint-

2.5" SSD Mounting Holes

Table of Contents