Getting Started; Step 1: Setting Up The Hardware - HighPoint RocketStor 6314A User Manual

4-bay thunderbolt 2 hardware raid storage enclosure

Hide thumbs Also See for RocketStor 6314A:

Table of Contents

Getting Started

Thank you for purchasing HighPoint Technologies RocketStor 6314A. You are only a few steps

away from utilizing RAID storage using the industry's most affordable hardware RAID solution.

To start using your RocketStor 6314A take the following steps:

1. Setting up the Hardware (pg. 8)

2. Install/Update drivers (pg. 10)

3. Install HighPoint RAID Management (WebGUI) (pg. 13)

4. Create RAID Arrays (pg. 16)

5. Initialize and format RAID Volumes (pg. 20)

Important: Ensure that you have all items listed under Kit Contents.

1. Plug in the power cord for your RS6314A. Note: To prevent physical drive damage, keep

the RS6314A oriented upright when in use.

2. Plug one end of the Thunderbolt cable to either of the RS6314A ports and the other end

to your computer's Thunderbolt port.

Figure 5. Power Cord plugged into back panel.

Table of Contents