TP-Link TD-W8961NB Installation Manual page 2

Plug the provided Power
A dapter into the Power jack
on the back of the Modem
Router and the other end to
a standard electrical wall
socket.
Power on all your network devices and then check to see if the LEDs of the
Modem Router display normally as the diagram below describes.
POWER: Solid light
ADSL: Solid light or flashing
WLAN: Solid light or flashing
LAN: Solid light if the corresponding port is connected
If the LEDs display abnormally, please check to see if all the cable
Note
connectors (power adapter, phone line and Ethernet cable) are well
connected to your device. With the phone line well connected, if the
ADSL LED turns off after flashing, please contact your ISP to ensure that
your Internet connection is active.
2