[D-3] Final Check - Yamaha 2009 Diversion XJ6S Service Manual

8. If the above-mentioned checks are within spec-
ification, replace the hydraulic unit assembly.
EAS4B56024

[D-3] FINAL CHECK

Checking procedures
1. Check the brake fluid level in the brake master cylinder reservoir.
Refer to "CHECKING THE BRAKE FLUID LEVEL" on page 3-11.
2. Check the wheel sensor housings and wheel sensors for proper installation.
Refer to "INSTALLING THE FRONT WHEEL" on page 4-13 and "INSTALLING THE REAR
WHEEL" on page 4-21.
3. Perform hydraulic unit operation test 1 or 2.
Refer to "HYDRAULIC UNIT OPERATION TESTS" on page 4-53.
4. Delete the fault codes.
Refer to "[D-1] DELETING THE FAULT CODES" on page 8-142.
5. Perform a trial run.
Refer to "TRIAL RUN" on page 4-56.
ABS (ANTI-LOCK BRAKE SYSTEM)
8-144