[B-3] Deleting The Fault Codes; [C-1] Final Check - Yamaha 2014 MT-07 Service Manual

Fault code No.
Item
Symptom
Order Item/components and probable cause
2 Defective rear wheel sensor
3 Defective hydraulic unit assembly
EAS31139

[B-3] DELETING THE FAULT CODES

To delete the fault codes, use the Yamaha diagnostic tool. For information about deleting the fault
codes, refer to the operation manual of the Yamaha diagnostic tool.
Check that all the displayed fault codes are deleted.
Yamaha diagnostic tool
90890-03231
Connecting the Yamaha diagnostic tool
Remove the protective cap "1", and then connect the Yamaha diagnostic tool to the coupler.
EAS31140

[C-1] FINAL CHECK

Check all the following items to complete the inspection.
If the process is not completed properly, start again from the beginning.
ABS (ANTI-LOCK BRAKE SYSTEM)
64
Rear wheel sensor power supply (voltage of power supply is low)
Power voltage supplied from the ABS ECU to the rear wheel sensor is
too low.
Check or maintenance job
• Check that there is no short circuit between the gray
terminal "1" and the white terminal "2".
• If there is a short circuit, the wheel sensor is defective.
Repair or replace the wheel sensor.
3. ABS ECU
4. Rear wheel sensor
Replace the hydraulic unit assembly.
Refer to "ABS (ANTI-LOCK BRAKE SYSTEM)" on page
4-62.
1
8-116
R/W W B B W G G/R W/Y B
R/L B/G
Y G G Br/W L/R L/B B/L
2 1
B W W Gy
4
3