Table of Contents
Advertisement
4. Check the PTC and accessories for shipping
damage. Pay particular attention to the PTC
case, display lens, and scanner lens.
If anything is missing or damaged, notify your
Telxon service representative.
Connecting the antenna
CAUTION! Do not turn on the PTC-960XRF
or attempt to transmit data unless the
antenna is attached; if the antenna is not
attached, the radio could be damaged.
1. Screw the antenna into the antenna mount
on the left side of the PTC-960XRF. See
Figure 1 on
antenna mount.
Installing the battery pack
1. Make sure the PTC is off.
2. Line up the end cap/battery pack assembly
with the opening in the bottom of the PTC's
handle. See Figure 1 on
tion of the battery pack opening.
3. Slide the battery pack into the handle until
the end cap presses against the body of the
handle and the tabs on the end cap lock the
assembly into place.
Charging the battery pack
Equipment required:
•
One battery charger for each PTC
page 22
for the location of the
page 22
for the loca-
18
Advertisement
Table of Contents
