Installing A New Battery Pack - Symbol PTC-960XRF User Manual

3. Refer to page 13
disposing of your nickel-cadmium battery
pack.

Installing a new battery pack

1. Make sure the PTC is off.
2. Line up the end cap/battery pack assembly
with the opening in the handle. The curved
sides of the end cap allow the battery pack to
be inserted in only one way.
3. Slide the end cap/battery pack into the han-
dle until the end cap presses against the body
of the handle and the release buttons snap
into place.
4. Pull on the end cap to make sure it is locked
into place.
for instructions on properly
45