Table of Contents
Advertisement
To change the baud rate or to reset it to
"Autobaud," type 2 and then press ENTER
at the Main Menu.
The following screen displays on your PC's
monitor:
Select the desired baud rate:
0. Quit
1. 9600 Baud
2. 19.2 K Baud
3. 38.4 K Baud
4. Autobaud (default)
Enter [0, 1, 2, 3, or 4]:
8. Change the communication port, if necessary.
Choose this option from the Main Menu only
if you have connected the download cable to
your PC's COM2 serial port instead of to
COM1. To change the port, type 3 at the
Main Menu and press ENTER. The program
will toggle between COM1 and COM2 every
time you choose the Main Menu's third
option.
9. Change the ROM image file names, if
necessary.
Select option 4 on the Main Menu to change
the ARC (application) file name or choose op-
tion 5 to change the RF file specified earlier.
Your PC prompts you for the new ROM im-
age file name. Type in the new path and file
name and press ENTER.
To leave this screen without changing the file
name, press the ESC key.
To remove a file name from a list of ROM
image files, press ENTER at the prompt. The
program will verify that you want to omit
this file before returning to the Main Menu.
50
Advertisement
Table of Contents
