Quick Start Guide - Quadra-Fire MTVI-E2-MBK Owner's Manual

MT. VERNON E2 INSERT
D. Quick Start Guide
1.
2.
3.
4.
5.
1. After the exhaust blower has stopped; quickly turn the dial from OFF to HI
two times
• The LIGHT will turn solid green and pellets will feed. Wait for 2 minutes
• If the LIGHT did not turn solid green:
1. Press up arrow on thermo-
stat to desired temperature.
*
appliance will not turn on unless target
temperature is minimum of one degree
above room temperature.
6
Empty Firebox
Add pellets and close lid
Turn DIAL to OFF
Plug in the appliance
• Exhaust blower will run for about 45 Seconds (wait for it to stop
before priming)
• Green light will start fl ashing
Ensure thermostat is connected properly per included instructions.
LO
- Turn dial back to OFF
- Unplug appliance, plug it back in and repeat
Priming is only needed for fi rst fi re or starting fi re on empty hopper.
LO LO
HI HI
2. Choose Setting:
LO – HI*
Green LIGHT will be-
gin fl ashing and stove
will start
It may take as long as 10
minutes to achieve a fi re
in the fi repot. Turning the
knob or thermostat to off
during this time will inter-
rupt the startup process.
*For fi rst fi re,
HHT recommends
running on HI for
fi rst 30 minutes
7082-132H
HI
Light
LO
Dial
HI
Trim
Control Panel
July 1, 2015