Radio To Radio Cloning - Motorola GP 68 User Manual

Radio to Radio Cloning

Cloning duplicates the contents of one radio (the mas-
ter radio) into another (the slave radio). Only current
radio configuration, channels and phone numbers are
copied from one radio to another. Tuning and align-
ment information are not affected by cloning. You need
a cloning cable in order to perform this operation.
SCI
SCI stands for Serial Communications Interface. It is
used to configure the radio and for radio to radio clon-
ing.
To Clone a Radio
CAUTION
Make sure both master and slaves radios are
turned off.
Lift the flap covering the SCI Port (17) of the mas-
ter radio.
Insert the cloning cable jack into the SCI Port (17).
Lift the flap covering the SCI Port (17) of the slave
radio.
Insert the other end of the cloning cable jack into
the SCI Port (17) of the slave radio.
Radio to Radio Cloning
41