Motorola GP 68 User Manual page 28

Storing a Phone Number
A maximum of 9 telephone numbers (up to 12 digits
each) can be stored into the radio memory. Each
phone number is stored and recalled via a unique
number on the keypad in the range of 1 to 9. The fol-
lowing procedure can also be used to store the access
/ deaccess codes (up to 8 digits each):
Press and hold
Button Press tone (takes about 2 seconds).
Enter a phone number location (in the range of 1 to
9) to store a phone number or press
the access code or
Enter the phone number (up to 12 digits long), or
access / deaccess code (up to 8 digits long).
Valid digits are DTMF digits 0 to 9, the characters
A, B, C, D, ∗ and #, and pause digits.
Pause digit (
between transmission of the digits programmed
before and after it. One or more pause digits can be
entered between successive digits of the phone
number (or access / deaccess code). When a
pause digit is successfully entered, two beeps are
heard; the display changes from 'A' to '-'. Pause
digits placed at the end of a phone number are not
remembered by the radio.
DTMF Telephone Interconnect
until you hear a second Valid
(flashing cursor)
to store
to store the deacess code.
NOTE
NOTE
)causes the radio to wait in
25