Motorola GP 68 User Manual page 35

Special Programming Mode (SPM)
The LCD Screen (18) displays the current access /
deaccess code. For a code which exceeds the 6-
digit display length, the rightmost digit flashes to
indicate that more digits exist on the right.
Enter the new access / deaccess code (up to 8 dig-
its) using any of the numeric keys, A, B, C, D,* and
#.
The LCD Screen (18) shows the new digits as they
are being entered. When the cursor is flashing
under a digit, the maximum number has been
entered. Use or
existing code and
Pause digit (
between transmission of the digits programmed
before and after it. One or more pause digits can be
entered between successive digits of the phone
access / deaccess codes. When a pause digit is
successfully keyed, two beeps are heard; the dis-
play changes from 'A' to '-'. Pause digits placed at
the end of a phone number are not remembered by
the radio.
Press the Toggle Light / Enter Button (4) to store
the new code and return to SPM Browse Menu.
A Valid Button Press tone sounds when the new
setting is stored.
To abort data entry, select another menu item by
turning the Channel Selector Knob (2) or wait until
32
NOTE
NOTE
to scroll through the
to erase unwanted digits.
NOTE
)causes the radio to wait in
NOTE