Motorola GP 68 User Manual page 37

Special Programming Mode (SPM)
Setting the Alert Tone Volume to off disables all
tones regardless of the setting of this parameter
(see "Setting the Alert Tone Volume" on
page 35).
In SPM, rotate the Channel Selector Knob (2) to
the Set SelCall Tone Status (
menu.
Use or (or
and Off.
CAUTION
The new setting is stored immediately.
To exit this menu, select another menu item by
turning the Channel Selector Knob (2).
Setting the Sidetones Status
If transmit sidetones is disabled, DTMF sidetones
such as phone number and PTT ID sidetones are not
heard during transmission.
In SPM, rotate the Channel Selector Knob (2) to
the Set Sidetones Status (
Use or (or
and Off.
CAUTION
The new setting is stored immediately.
To exit this menu, select another menu item by
turning the Channel Selector Knob (2).
34
NOTE
or
) to toggle between On
or
) to toggle between On
)
) menu.