Power Knob; Night Light - HoMedics HUM-CM50 Instruction Manual And Warranty Information

Power/Mist Knob

Power Knob

Plug unit in to a 240 volt AC electrical outlet. Turn the POWER knob clockwise to
turn unit on.
ATTENTION: When the water in the tank is almost empty the red indicator light in
the tank will turn on and the power will shut off to indicate to the user to refill water.
Mist Adjustment Setting
Mist adjusts from Lowest output ( ) to Highest output (
output, turn the MIST knob clockwise. To decrease mist output, turn the MIST knob
counter-clockwise. (Fig.2)

Night Light

Press the NIGHT LIGHT (
of the water tank will turn on, illuminating the tank. (Fig.2)
Oscillation
When the humidifier is producing mist, press the OSCILLATION ON/OFF (
to turn on the motorized oscillation feature. The nozzle at the top of the unit will
oscillate in a 120° range from side to side. To target the nozzle and mist in a fixed
direction, press the OSCILLATION ON/OFF (
desired position and the nozzle will stop and direct mist to the desired area only.
(Fig.2)
NOTE: The oscillation feature will not operate if the humidifying function is not
operating. Oscillation feature will only work when mist is being produced.
Mist Setting Indicator
Night Light
ON/OFF Button
Oscillation
ON/OFF Button
Fig.2
) button to turn on the night light. The light at the bottom
Locator Icons
). To increase the mist
) button when the nozzle is at the
7
Oscillating
Head & Nozzle
LOCK/UNLOCK
Ring
Fig.3
) button