Cleaning And Care; Tank Cleaning; Surface Cleaning - HoMedics HUM-CM50 Instruction Manual And Warranty Information

5. Place the tank back on the base.
6. Place the oscillating nozzle back on to the unit and lock into place by turning
the ring to the right until the locator icon is aligned with the LOCK position.
(Fig.10)

Cleaning and Care

CAUTION: Before cleaning the unit, turn power off and unplug unit from the outlet.

Tank Cleaning

Remove the oscillation nozzle. To remove
the nozzle, turn the ring on the bottom of
the nozzle to the left until the locator icons
on the head, ring and base all line up and
are aligned with the UNLOCK position. Lift
Fig.13
up to remove the nozzle and set aside.
Remove the water tank from the humidifier
base by lifting it by the flip-up handle.
Unscrew the tank cap; wipe the tank with
a soft cloth then wash it with clean water.
Suggestion: Clean the water tank once
every two to three weeks, depending on
Fig.14
your water conditions.
Ultrasonic Nebulizer Cleaning
Put small amount of mild dish soap on
the surface of the ultrasonic nebulizer,
then pour in some water and soak for
5 minutes. Brush clean with soft bristle
Fig.15 brush (not included) and rinse.

Surface Cleaning

Clean the surface of the unit with a clean
damp soft cloth.
Fig.16
11