Optional Blower Installation; Accessing The Blower - Napoleon BGD42CFN Installation And Operating Instructions Manual

7.0 OPTIONAL BLOWER INSTALLATION

TURN OFF THE GAS AND ELECTRICAL POWER BEFORE SERVICING THIS APPLIANCE.
USE ONLY WOLF STEEL APPROVED OPTIONAL ACCESSORIES AND REPLACEMENT PARTS WITH
THIS APPLIANCE. USING NON-LISTED ACCESSORIES (BLOWERS, DOORS, LOUVRES, TRIMS, GAS
COMPONENTS, VENTING COMPONENTS, ETC.) COULD RESULT IN A SAFETY HAZARD AND WILL
ENSURE THAT THE FAN'S POWER CORD IS NOT IN CONTACT WITH ANY SURFACE OF THE
APPLIANCE TO PREVENT ELECTRICAL SHOCK OR FIRE DAMAGE. DO NOT RUN THE POWER
THE WIRE HARNESS PROVIDED IN THE BLOWER KIT IS A UNIVERSAL HARNESS. WHEN
INSTALLED, ENSURE THAT ANY EXCESS WIRE IS CONTAINED, PREVENTING IT FROM MAKING
7.1

ACCESSING THE BLOWER

7.1.1 Remove the main door, see "DOOR
INSTALLATION / REMOVAL" section.
7.1.2 Carefully remove the logs.
7.1.3 Remove the grate by lifting it off of the two
securing pins.
7.1.4 Remove the 6 screws as illustrated and lift out
the log support. Be careful not to lose the
spacers for the screws indicated.
7.1.5 Remove the 7 perimeter screws as illustrated
and lift out the burner base. (The gas line
fl ex-connector should provide suffi cient
movement to permit shifting the burner
assembly to the side).
7.1.6 Reverse procedure to re-assemble.
WARNING
!
RISK OF FIRE AND ELECTRICAL SHOCK.
VOID THE WARRANTY AND CERTIFICATION.
CORD BENEATH THE APPLIANCE.
CONTACT WITH MOVING OR HOT OBJECTS.
33
51.5
SPACERS SPACERS ERS
W415-0779 / A / 04.27.10