Vacuum Cleaning Using The Accessories - Royal Infinity UP1LIGHT Operating Manual

4 Using the accessories
14
2
15
4.3 Vacuum cleaning
using the accessories
16
34
3. Connect the suction hose (Fig. 14/1) with the connect-
ing tube on the handle of the telescopic tube (Fig. 14/2)
1
as shown.
The retaining clip of the suction tube (Fig. 14/1) has to
be pushed over the brim on the handle and lock into
place visibly.
4. Now put the chosen nozzle supplied onto the telescopic
tube (Fig. 15).
NOTE:
To make sure it sits securely, we recommend turning it
slightly when putting it on.
5. Insert the mains plug into a socket with ground/safety
contact.
6. Switch on the appliance with the on/off switch ("
7. You can now vacuum clean with the accessory you
have just attached. Observe the instructions under
Chapter 4.3, "Vacuum cleaning using the accesso-
ries" for this.
WARNING:
Danger of injury! Especially when vacuum-cleaning stairs
make sure that you always stand on a higher level than
the appliance.
ATTENTION:
Hold the device in your hand as shown (Fig. 16) when
you don't want to use it as an upright vacuum cleaner.
Otherwise there is a danger of the device falling over and
getting damaged.
").