Heatilator NDI30-C Owner's Manual page 35

G. Install the Log Assembly
Log Set Assembly: LOGS-NDI35
Models: NDI35, NDI35-SP, NDI35-C
SRV2224-701 SRV2224-701
SRV2224-703 SRV2224-703
SRV2224-706 SRV2224-706
LOG SUPPORT LOG SUPPORT
Figure 2.
CAUTION: Logs are fragile, handle with care. Log #1 (SRV2224-701) Position Log #1 as shown in Figure 3. Note additional
references in Figure 2. Set the log on the log support. Ensure the log is pushed back so that the log touches the back of the
fi rebox. The log should be centered with the burner.
LOG CONTACTS LOG CONTACTS
LEFT GRATE TINE LEFT GRATE TINE
2 2
Figure 4. Log #2
Log #2 (SRV2224-706): Position Log #2 as shown in Figure 4. Refer to Figure 2 and Figure 5 for additional details. Mate
the slot located on the bottom of Log #2 with the left log pin located on the burner top. Rotate the left end of Log #2 forward
until it comes into contact with the left grate tine.
Heatilator • NDI30-C, NDI30-SP, NDI35-C, NDI35-SP, NDI30-SPFK, NDI35-SPFK • 2226-901 Rev. K • 11/12
SRV2224-704 SRV2224-704
SRV2224-702 SRV2224-702
SRV2224-705 SRV2224-705
LOG PINS LOG PINS
BASE TINE BASE TINE
GRATE TINES GRATE TINES
LOG PIN LOG PIN
MATES WITH MATES WITH
LOG SLOT LOG SLOT
Figure 1. Log Set Installed
FLAT SPOT FLAT SPOT
FLAT SPOT FLAT SPOT
FOR LOG #5 FOR LOG #5
FOR LOG #4 FOR LOG #4
Figure 3. Install Log #1
Figure 5. Log #2
1 1
FLAT SPOT FLAT SPOT
FOR LOG #6 FOR LOG #6
SLOT SLOT
35