Names And Function; Front Panel - Marantz SR7002 User Manual

NAMES AND FUNCTION

FRONT PANEL

q w e r ty u
AV SURROUND RECEIVER SR8002
INPUT SELECTOR
PURE DIRECT
DISP
SLEEP
M-DAX
SURROUND
MODE AUTO
PURE DIRECT THX
STANDBY
POWER ON/STANDBY
PHONES
@4 @3 @2
q
POWER switch and STANDBY indicator
When this switch is pressed once, the unit turns ON
and the display illuminates. When pressed again, the
unit turns OFF and the STANDBY indicator will be
illuminated.
w
INPUT SELECTOR knob
(AUDIO/ VIDEO)
This knob is used to select the input sources. (See
page 58)
e
HEADPHONE jack for stereo headphones
This jack may be used to listen to the unit's output
through a pair of headphones. Be certain that the
headphones have a standard 1/4" stereo phono
plug.
r
SURROUND MODE button
Press this button to select the surround mode.
t
AUTO (Auto surround) button
Press this button to select the AUTO mode from the
surround modes. When this mode is selected, the
unit determines the surround mode corresponding to
a digital input signal automatically.
8
io!0 ! 1 !2
VOLUME
MULTI AUTO TUNED ST SPKR A B V-OFF PEAK ATT ANALOG SURROUND
DIGITAL DIGITAL
AUTO SURR DIRECT DISC 6.1 MTX 6.1 NIGHT EQ
L C R
AAC PCM LFE
SL S SR
DOWN
MULTI
MULTI SPEAKER BAND T-MODE MEMORY CLEAR
7.1CH INPUT DISPLAY
SPEAKERS
M-DAX A/B
ENTER
MENU EXIT
AUX 1 INPUT
DIGITAL S-VIDEO
MIC
@1 @0 !9 !8 !7 !6 !5
y
MULTI (Multi Room) button
Press this button to activate the Multiroom system.
"MULTI" indicator will be illuminated in the display.
(See page 78)
u
MULTI SPEAKER button
Press this button to activate the Multiroom Speaker
system. "MULTI" indicator will be illuminated in the
display. (See page 78)
i
BAND button
Press this button to switch between FM, AM and XM
(XM Ready) in the TUNER mode.
o
T-MODE button
Press this button to select the auto stereo mode or
mono mode when the FM band is selected.
The "AUTO" indicator lights in the auto stereo mode.
(See page 68)
!0
MEMORY button
Press this button to enter the tuner preset memory
numbers or station names. (See page 68)
!1
CLEAR button
Press this button to cancel the station-memory
setting mode or preset scan tuning. (See page 69)
!2
INFRARED receiving sensor window
This window receives infrared signals for the remote
controller.
!3
VOLUME control knob
!3 !4
This knob is used to adjust the overall sound level.
Turning the control clockwise increases the sound
level.
!4
AUX1 INPUT jacks
These auxiliary video/audio input jacks accept the
connections of a camcorder, portable DVD, game
etc. When not using these jacks, protect with the
UP
included jack covers.
How to Attach the Front AUX Jack Cover
VIDEO L AUDIO R
D IG
IT
Front AUX Jack Cover
!5
M-DAX button
Press this button to select M-DAX processing for
input source. (See page 59)
!6
SPEAKER A/B button
Press this button to select speaker systems A and/or
B.
!7
MIC jack
Automatically measure speaker characteristics using
the included microphone. (See page 46)
!8
DISPLAY button
Press this button to change the FL display mode.
!9
EXIT button
Press this button to exit from the SETUP MAIN
MENU.
Cursor (5, ∞, 2, 3) / ENTER button
@0
Press these buttons to operate the SETUP MAIN
MENU and TUNER function.
@1
MENU button
Press this button to enter the SETUP MAIN MENU.
@2
7.1CH INPUT button
Press this button to select the output of an external
multichannel player.
@3
THX button
Press this button to select THX processing for input
source.
@4
PURE DIRECT button and indicator
When this button is pressed once, "SOURCE
DIRECT" appears on the FL display. If pressed again,
"PURE DIRECT" appears. After 2 seconds, the FL
display indication goes out.
In the source/pure direct mode, the tone control
U P
circuitry and bass management are bypassed.
A L
Notes:
S -V
A U
ID E O
X 1 IN
P U
T
V ID
E O • The surround mode is automatically switched to
L
A U
D IO
R AUTO when the pure direct function is turned on.
• Additionally, speaker configurations are fixed
automatically as follows.
Front SPKR = LARGE
Center SPKR = LARGE
Surround SPKR = LARGE
Surround Back SPKR = LARGE
Sub woofer = YES