Connecting Video Components - Marantz SR7002 User Manual

CONNECTING VIDEO COMPONENTS

DVD player
DIGITAL AUDIO VIDEO COMPONENT
OUT OUT OUT VIDEO OUT
Y C / P C / P
B B R
L R
L R
L R L R R L
L R L R
AUDIO AUDIO VIDEO
OUT IN OUT IN
L R L R
VIDEO
PROJECTOR
COMPONENT S-VIDEO
S-VIDEO
VIDEO IN IN
OUT
Y C B / P B C R / P R
R
S-VIDEO
OUT IN
VCR
Satellite Tuner
DIGITAL AUDIO VIDEO S-VIDEO
OUT OUT OUT OUT
L R
L R
R L
Video
R L
S-Video
L R
Analog Audio
AUDIO VIDEO VIDEO S-VIDEO Digital Audio
OUT OUT IN IN
(coaxial)
L R
Digital Audio
(optical)
TV
VIDEO, S-VIDEO, COMPONENT JACKS
There are 3 types of video jacks on the rear panel.
VIDEO jack
The video signal for the VIDEO jacks is the
conventional composite video signal.
S-VIDEO jack
The video signal is separated into luminance (Y) and
color (C) signals for the S-VIDEO jack. The S-VIDEO
signals enables high-quality color reproduction. If
your video component has an S-VIDEO output, we
recommend to use it. Connect the S-VIDEO output
jack on your video component to the S-VIDEO input
jack on this unit.
Component jack
Make component video connections to a TV or
monitor with component inputs to produce higher
quality video images. Use a component video cable
or 3 video cords to connect the component video out
jacks on the unit to the monitor.
Notes:
• Be sure to connect the left and right audio channels
properly.
Red connectors are for the R (right) channel, and
white connectors are the for L (left) channel.
• Be sure to connect the inputs and outputs of the
video signals properly.
• If you connect the S-VIDEO or component signal to
the S-VIDEO or component jack on this unit, it is not
necessary to connect the conventional video signal to
the VIDEO (composite) jack. If you use both video
inputs, this unit gives priority to the S-VIDEO signal.
• Each type of video jack works independently.
Signals input to the VIDEO (composite) and S-
VIDEO jacks or component are output to the
corresponding VIDEO (composite) and S-VIDEO
or component jacks, respectively.
• This unit has the "TV-AUTO ON/OFF" function to
turn the TV ON or OFF automatically, by sensing the
incoming video signal from the VIDEO jacks.
• You may need to setup the digital audio output
format of your DVD player, or other digital source
components. Refer to the instructions of the each
component connected to the digital input jacks.
• There is no Dolby Digital RF input jack. Use an
external RF demodulator with a Dolby Digital
decoder to connect the Dolby Digital RF output jack
of the DVD player to the digital input jack on this
unit.
• The COMPONENT OUTPUT 1 and 2 terminals of
this unit can output the same video signal. Moreover,
the OUTPUT 2 terminal of the SR8002 can output
video signals for multi room playback. (See page
53)
33