Operating Instructions; Window Frame Removal; Log Installation; Burner Lava Rock Placement - Vermont Castings RFSUV34 Homeowner's Installation And Operating Instructions Manual

Window Frame Removal

Refer to Figure 7.
1. Shut off gas. (See Lighting Instructions)
2. Let the unit cool if it has been operating.
3. Open two side doors.
4. Open the clamps on two sides.
5. Pull the frame forward.
6. To reinstall window frame follow the above proce-
dure in reverse.
Open
Clamps
Fig. 7 Open clamps and pull frame forward to remove.

Log Installation

1. Remove window frame. (See "Window Frame" sec-
tion)
2. Remove logs from packaging.
KR10
KR8
Fig. 8 Correct log placement.
10001769

Operating Instructions

Pull
Frame
Forward
HS115
window frame
removal
12/02
KR11
KR7
As with all plastic - these are not toys and
should be kept away from children and infants.
Refer to Figure 8
3. Place rear log (KR10) on rear bracket (ensure log is
seated properly, leveled and centered to the unit), so
it will not move from side to side and is firmly posi-
tioned on the bracket.
4. Slip front ember log (KR7) down behind the front
deflector.
5. Place front left log (KR8) on top of burner, left side.
Use the log's bottom holes to locate it into the left
bracket log locator studs.
6. Place front right log (KR9) on top of burner, right
side. Use the log's bottom holes to locate it into the
right bracket log locator studs.
7. Place burner lava rock on top of burner. (Refer to

Burner Lava Rock Placement)

8. Place top left log (KR11) onto locator notches. En-
sure log is secure.
9. Place top right log (KR12) onto locator notches.
Ensure log is secure.
HS115
Burner Lava Rock Placement
Open the lava rock bag and place the contents accord-
ing to Figure 9. First place the small lava rock, then the
skinnier and long sticks.
No lava rock is to be placed on the rear section of the
burner.
�����
RFSUV34 Vent-Free Heater
KR12
KR9
LG436
7