Korg Liverpool Owner's Manual page 89

Note: All events on the very first tick
(M001.01.000), like Perf, Style, Tempo, Chord,
Style Element selection, cannot be deleted.
Style
This is the last selected Style. To insert a Style change at
the current position, follow the standard selecting pro-
cedure using the buttons of the STYLE section.
Note: Any Style Change inserted after the beginning of the
measure (i.e., to a position other than Mxxx.01.000) will be
effective at the following measure. For example, if a Style
Change event has been inserted at M004.03.000, the selected
Style will be effectively selected at M005.01.000. (This works
exactly as in Style Play mode).
Note: When inserting a Style Change, you may also insert a
Tempo Change at the same position. A Style Change will not
automatically insert the Style's Tempo.
DELETE When the Style parameter is selected, and
the side arrow ( ) – showing that a Style
Change event has been selected at the cur-
rent position – appears next to it, press
DELETE to delete the Style Change at the
current position.
Note: If the side arrow doesn't appear, the
event was not selected at the current position,
and will not be deleted.
SHIFT + DELETE
When the Style parameter is selected,
press SHIFT + DELETE to delete all Style
Change events, starting from the current
position to the end of the Song. To delete
all Style Change events in the Song, go
back to the M001.01.000 position, and
press SHIFT + DELETE.
Note: All events on the very first tick
(M001.01.000), like Perf, Style, Tempo,
Chord, Style Element selection, cannot be
deleted.
Perf
This is the last selected Performance. Select a Perfor-
mance to recall the Style it memorizes. To insert a Per-
formance change at the current position, follow the
standard selecting procedure using the buttons of the
PROGRAM/PERFORMANCE section.
Note: The STYLE CHANGE LED is automatically turned
on when entering the Chord/Acc Step Mode. This means that
selecting a Performance automatically selects the Style mem-
orized into the Performance.
The SINGLE TOUCH and STS buttons are automatically
disabled, meaning that you can't change the Realtime (Key-
board) tracks while in Chord/Acc Step Mode.
DELETE When the Perf parameter is selected, and
the side arrow ( ) – showing that a Perfor-
mance Change event has been selected at
the current position – appears next to it,
press DELETE to delete the Performance
Change at the current position.
Note: If the side arrow doesn't appear, the
event was not selected at the current position,
and will not be deleted.
Backing Sequence operating mode
Chord/Acc Step Recording page
SHIFT + DELETE
When the Perf parameter is selected, press
SHIFT + DELETE to delete all Perfor-
mance Change events, starting from the
current position to the end of the Song. To
delete all Performance Change events in
the Song, go back to the M001.01.000 posi-
tion, and press SHIFT + DELETE.
Note: All events on the very first tick
(M001.01.000), like Perf, Style, Tempo,
Chord, Style Element selection, cannot be
deleted.
SE (Style Element)
This is the Style Element (i.e., a Variation, Fill, Intro, or
Ending). The length of the selected Style Element is
always shown on the measure counter, at the top of the
display:
This will let you know where to place the following
Style Element Change. For example, if you inserted an
Intro event lasting for 4 measures, you can insert 4
empty measure after this event, and a Variation event
at the end of the Intro, beginning at the 4th empty mea-
sure.
"Off" means that the accompaniment will not play at
the selected position – only the Realtime tracks will
play.
Hint: Insert a Style Element Off event exactly where the
auto-accompaniment must stop, at the end of the Song.
Chord
Use the D VOLUME/VALUE buttons to select the
Chord line. Use the F-1–F-4 buttons to select the part of
the chord you wish to edit.
Name Type
Use the TEMPO/VALUE controls to modify the
selected parameter. You can also play a chord, and it
will be automatically recognized. While recognizing a
chord, the status of the BASS INV. button will be con-
sidered.
"No chord" means that the accompaniment will not
play at the current position (apart for the Drum and
Percussion tracks). To select the "No chord" option,
press F-1 to select the Name part of the Chord, then use
the TEMPO/VALUE section to select the very last value
(C...B, Off).
Note: If you replace a chord with a different one, please
remember that the Lower track will not be automatically
changed.
Transport controls
While in Step Mode, you can use various control panel
buttons to accomplish the editing procedure.
Tension Extension
87