Edit: Delete; Edit: Cut Measures; Edit: Insert Measures - Korg Liverpool Owner's Manual

102 Song operating mode
Page 20 - Edit: Delete
S / E (Start/End)
Use these parameters to set the starting (S) and ending
(E) points of the range to edit.
If you wish to select a four-measure sequence starting
at the beginning of the Song, the Start will be posi-
tioned at 1.01.000, and the End at 5.01.000.
Bottom / Top
Use these parameters to set the bottom and top of the
keyboard range to edit. If you select the same note as
the Bottom and Top parameters, you can select a single
percussive instrument in a Drum track.
PAGE 20 - EDIT: DELETE
This page is where you can delete MIDI events from
the Song.
After setting the various parameters, press ENTER to
execute. The "Are you sure?" message will appear.
Press ENTER to confirm, EXIT to abort.
Trk (Track)
Use this parameter to select a track.
All All tracks selected.
1...16 Selected track.
Master Master track. This is where the Tempo,
Scale and Effect events are recorded.
Ev (Event)
Type of MIDI event to delete.
All All events. The measures will not be
removed from the Song.
Note All notes in the selected range.
Dup.Note All duplicate notes. When two notes with
the same pitch are encountered on the
same tick, the one with the lowest velocity
is deleted.
A.Touch After Touch events.
P.Bend Pitch Bend events.
PrChange Program Change events, excluding the
bundled Control Change #00 (Bank Select
MSB) and #32 (Bank Select LSB).
C.Change All Control Change events, for example
Bank Select, Modulation, Damper, Soft
Pedal...
CC00/32...CC127
Single Control Change events. Double
Control Change numbers (like 00/32) are
MSB/LSB bundles.
S / E (Start/End)
Use these parameters to set the starting (S) and ending
(E) points of the range to delete.
If you wish to select a four-measure sequence starting
at the beginning of the Song, the Start will be posi-
tioned at 1.01.000, and the End at 5.01.000.
Bottom / Top
Use these parameters to set the bottom and top of the
keyboard range to delete. If you select the same note as
the Bottom and Top parameters, you can select a single
percussive instrument in a Drum track.
Note: These parameters are available only when the All or
Note options are selected.
PAGE 21 - EDIT: CUT MEASURES
In this page you can cut measures from the Song.
After selecting the Start and Length parameters, press
ENTER to execute. The "Are you sure?" message will
appear. Press ENTER to confirm, EXIT to abort.
After the cut, the following measure are moved back, to
fill the cut measures.
Start
First measure where to begin cutting.
Length
Number of measures to be cut.
PAGE 22 - EDIT: INSERT MEASURES
In this page you can insert measures in the Song. You
can also use this function to insert measures with a dif-
ferent meter (time signature).
After selecting the Meter, Start and Length parameters,
press ENTER to execute. The "Are you sure?" message
will appear. Press ENTER to confirm, EXIT to abort.
Note: You cannot append measures after the end of the Song.
To append measures use the Record or Copy function.
Note: You cannot use this function on an empty Song.
Meter
Meter of the measures to be inserted.
Start
First of the inserted measures.
Length
Number of measures to be inserted.