Event Filter - Korg Liverpool Owner's Manual

104 Song operating mode
Page 25 - Event Filter
And here are the events contained in the Master track.
Event First value
Tempo Tempo change
Volume Master Volume value
Meter
Meter change
Scale One of the available pre-
set Scales
UScale (User One of the available User
Scale) Scales
QT (Quarter Tone) Altered note
QT Clear (Quar- Reset of all Scale
ter Tone Clearing) changes
FXType One of the four available
FX processors
FXSend Feedback Send (B>A or
D>C)
(a) Meter changes can't be edited or inserted. To insert a Meter
change, use the Insert function in the Edit section and insert a series
of measures with the new meter. Existing data can then be copied or
entered to these measures
(b) To edit the Quarter Tone settings, select the first value, then
select the scale's degree to edit. Edit the second value to change the
tuning of the selected note of the scale.
(c) When selecting a different effect number during this edit, default
settings will be assigned to this event.
To change the event type, use the C VOLUME/VALUE
buttons to select the Event line, then use the same but-
tons or the TEMPO/VALUE controls to select a differ-
ent event type.
To select and edit the event's value, use the F-3 and F-4
function keys, and use the G/VOLUME/VALUE but-
tons or the TEMPO/VALUE controls.
Length
Length of the selected Note event. The value format is
the same as the Position value.
Note: If you change a length of "000.00.000" to a different
value, you can't go back to the original value. This rather
uncommon zero-length value may be found in the drum and
percussion tracks of Songs made in Backing Sequence mode.
Transport, navigation and editing controls
E/F and H VOLUME/VALUE buttons
These buttons are the "Scroll to previous event" and
"Scroll to next event" controls. They corresponds to the
scroll arrows shown on the screen.
G VOLUME/VALUE buttons
Use these buttons to select the corresponding parame-
ter value area.
F-3 and F-4 buttons
After selecting the parameter value area with the G
VOLUME/VALUE buttons, use these buttons to select,
respectively, the first and second value of the event in
edit.
SEQ1 PLAY/STOP button
Press PLAY/STOP to listen to the Song in edit. Press
PLAY/STOP again to stop it.
Second value
–
–
–
(a)
Root note for the
selected Scale
Root note for the
selected Scale
(b)
Note alteration
–
(c)
Effect number
Feedback send
level
SHIFT + << or >>
Keep the SHIFT button pressed and press the << or >>
button to open the Go to Measure window.
Use the TEMPO/VALUE controls to select a measure,
and press ENTER to confirm, or EXIT to abort.
SHIFT + PAUSE
While the sequencer is running, keep the SHIFT button
pressed, and press the PAUSE button to display the
event that is currently playing. This is called the Catch
Locator function.
INSERT
Press the INSERT button to insert a new event at the
current shown Position. The default values are Type =
Note, Pitch = C4, Velocity = 100, Length = 192.
Note: You can't insert new events in an empty, non-
recorded Song. To insert an event, you must first insert some
empty measures. To use the Insert function, press MENU
and one of the F VOLUME/VALUE buttons, then press the
PAGE+ button twice.
DELETE
Press the DELETE button to delete the event shown in
the display.
PAGE 25 - EVENT FILTER
This page is where you can select the event types to be
shown in the Event Edit page. You can access this page
by pressing the PAGE+ button while in the Event Edit
page.
Turn On the filter for all event types you do not wish to
see in the Event Edit page.
Note Notes.
Prog Program Change values.
Ctrl Control Change events.
T/Meter Tempo and Meter changes (Master Track
only).
Aftt Mono (Channel) Aftertouch events.
PAft Poly Aftertouch events.
Bend Pitch Bend events.
PaCtl Controls exclusive of the Liverpool, like
the FX and Scale settings. These controls
are recorded to the Master Track, and
saved as System Exclusive data.