Chord/Acc Step Recording Page - Korg Liverpool Owner's Manual

86 Backing Sequence operating mode

Chord/Acc Step Recording page

RT/Pads: This Backing Sequence track includes the
four Realtime (Keyboard) tracks, and the four Pads.
They will be Song tracks 1–8, as in the following table:
RT/Pad track
Upper 1
Upper 2
Upper 3
Lower
Pad 1
Pad 2
Pad 3
Pad 4
Ch/Acc: This Backing Sequence track includes all Style
tracks, including recognized chords. They will be Song
tracks 9–16.
MUTE The track is muted. If this tracks has
already been recorded, it will not be heard
during recording of the other Backing
Sequence track.
PLAY The track is in play. If there are recorded
data, they will be heard during recording
of the other Backing Sequence track.
REC The track is in record. All previously
recorded data will be deleted.
CHORD/ACC STEP RECORDING PAGE
While you are in Backing Sequence mode, press
RECORD, then one of the B VOLUME/VALUE buttons,
to access the Chord/Acc Step Recording mode. The
RECORD LED turns on.
Side arrow ( )
The small arrow next to a parameter means that its
value is effective at the current position. For example, if
you are at the "M003.01.000" position, and an arrow
lights up next to the Chord parameter, this means that
a chord change happens at the "M003.01.000" position.
M(easure)
This is the locator. It shows the current position of the
Step Editor. To go to a different position within the
Song, select this parameter, then use the TEMPO/
VALUE controls, the A VOLUME/VALUE buttons, or
the < > buttons (while the << >> buttons let you move to
the previous or following measure). When using one of
these controls, the locator moves in steps of 1/8 (192
ticks), or jumps to the next event.
Song track/Channel
1
2
3
4
5
6
7
8
The locator's format is as follows:
Measure
Measure: Measure or bar number.
Beat: Divider in the Time Signature ratio (e.g., a quar-
ter in a 3/4 time).
Tick: Minimal sequencer's resolution. The Liverpool
internal sequencers feature a resolution of 384 ticks per
quarter.
INSERT When the Measure parameter is selected,
press INSERT to insert a measure starting
from the current position. All Chord/Acc
events contained into the current measure
will be moved to the following measure.
The event at the Mxxx.xx.000 position (i.e.,
exactly at the beginning of the measure,
like a Time Signature or Style change) will
not be moved.
DELETE When the Measure parameter is selected,
press DELETE to delete the current mea-
sure. All Chord/Acc event contained into
the following measures are moved to the
current measure.
SHIFT + DELETE
When the Measure parameter is selected,
press SHIFT + DELETE to delete all events
in the Style tracks, starting from the cur-
rent position to the end of the Song. To
delete all events in the Style tracks, go
back to the M001.01.000 position, and
press SHIFT + DELETE.
Note: All events on the very first tick
(M001.01.000), like Style, Tempo, Chord,
Style Element selection, cannot be deleted.
Tempo
This is the Tempo Change parameter. To insert a Tempo
Change event at the current position, select this param-
eter and use the TEMPO/VALUE controls to change its
value.
DELETE When the Tempo parameter is selected,
and the side arrow ( ) – showing that a
Tempo Change event has been selected at
the current position – appears next to it,
press DELETE to delete the Tempo
Change at the current position.
Note: If the side arrow doesn't appear, the
event was not selected at the current position,
and will not be deleted.
SHIFT + DELETE
When the Tempo parameter is selected,
press SHIFT + DELETE to delete all
Tempo Change events, starting from the
current position to the end of the Song. To
delete all Tempo Change events in the
Song, go back to the M001.01.000 position,
and press SHIFT + DELETE.
Beat
Tick