Table of Contents
Advertisement
28
Intake Restrictor Adjustment
To access the intake restrictor, remove the glass tray (see page 57). The intake restrictor is located along
the back wall of the firebox. See the illustration below for details on adjusting the restrictor.
© Travis Industries
Installation
(for qualified installers only)
Position # 1 (open)
Socket
Loosen the two screws
holding the intake
restrictor in place..
Position # 2 (closed)
Slide the restrictor down
to the lower position and
tighten the screws.
4140926
1/4"
100-01395
Advertisement
Table of Contents
