Connection To A Device With 2-Channels Of Analog Audio Inputs; Surround Connections To A Device With 7.1/5.1-Channels Of Analog Audio Inputs; Network Connection With Lan; Lan Cable - Marantz BD7004 User Manual

ENGLISH
Connections

Connection to a Device with 2-channels of Analog Audio Inputs

audio
Stereo component
AUDIO IN
L
R
Supplied cables used in this connection are as follows:
• RCA audio cable (L/R) x 1
Note
• When connecting to a 2-channel audio stereo device, use the 2ch AUDIO OUT jacks. If the 7.1ch
AUDIO OUT jacks are used, set "7.1ch Audio Out" in the "Audio" menu to "2 Channel" (Refer to
page 34). For software recorded in multi-channel, analog signals that have been down-mixed
into 2 channels are output. (For sources which are prohibited from down-mixing, only the FL/FR
signals are output.)

Surround Connections to a Device with 7.1/5.1-channels of Analog Audio Inputs

Analog 7.1ch/5.1ch audio signals can be output from 7.1ch AUDIO OUT jacks.
this unit
ER
OUT
FL C
2ch AUDIO OUT
R L
2C
FR SW
7.1ch AUDIO OUT
Supplied cables used in this connection are as follows:
• RCA audio cable (L/R) x 1
Please purchase the rest of the necessary cables at your local store.
RCA audio cable
2ch AUDIO OUT
R L
AC IN DIGITAL OUT COMPONENT VIDEO OUT VIDEO OUT FLASHER
IN OUT
COAXIAL
STRAIGHT
CABLE
NETWORK HDMI OUT
RS-232C
AV amplifier
SL SBL
SR SBR
Note
• If you connect to 5.1-channel surround system, do not connect to SBR/SBL (surround back R/L)
jacks, then set "Surround Back" in "Speaker Configuration" to "None".
this unit

Network Connection with LAN

• You can use a disc which offers BD-Live function by connecting the unit to the Internet.
FL C SL SBL
2ch AUDIO OUT (For BD-Live information, please refer to page 29.)
R L
FR SW SR SBR
7.1ch AUDIO OUT
Telecommunications
equipment (modem, etc.)
Internet
audio
FRONT
L
R
SURROUND
L
No supplied cables are used in this connection:
R
Please purchase the necessary cables at your local store.
SURROUND
BACK
L
R
Note
• After connecting to the Internet, set up necessary network settings.
CENTER
• Do not insert any cable other than a LAN cable to the NETWORK terminal to avoid damaging the
unit.
SUB-
• If your telecommunications equipment (modem, etc.) does not have broadband router
WOOFER
functions, connect a broadband router.
• If your telecommunications equipment (modem, etc.) has broadband router functions but there
is no vacant port, use a hub.
• For a broadband router, use a router which supports 10BASE-T/100BASE-TX.
• Do not connect your PC directly to the NETWORK terminal of this unit.
15
ENGLISH
Hub or broadband router
LAN WAN
5 4 3

LAN cable

this unit
DIGITAL OUT
AC IN
COAXIAL
NETWORK HDMI OUT
Connections
LAN
2 1
LAN cable
Telecommunications
equipment (modem, etc.)
NETWORK
COMPONENT VIDEO OUT VIDEO OUT FLASHER
IN OUT
FL C SL SBL
2ch AUDIO OUT
STRAIGHT
CABLE R L
RS-232C
FR SW SR SBR
7.1ch AUDIO OUT