Channel Level - Marantz BD7004 User Manual

ENGLISH
Function Setup
To make the most of its feature, set up your speakers appropriately by referring to the table below.
Speaker setting options are available at the following locations;
<Speaker setting for the audio signal output from the HDMI OUT jack >
(Available when you have HDMI cable connected to the HDMI OUT jack)
SETUP Quick HDMI Audio Out
SETUP Custom Audio HDMI Audio Out
<Speaker setting for the audio signal output from the 7.1ch AUDIO OUT jacks >
SETUP Quick 7.1ch Audio Out
SETUP Custom Audio 7.1ch Audio Out
How to navigate through the "HDMI Multi(LPCM)" and "Multi Channel" setting
1) Use [ / ] to select the menu item.
2) Use [ / ] to select setting items.
• Use [RETURN] to go back to the previous screen.
3) Use [ / ] to select desired options.(Except for "Test Tone" and "Default".)
For "Test Tone":
Use [ / ] to select "Manual" or "Auto", then press [ENTER].
• The test tone will be output. If you select "Manual", use [
[ / ] to adjust the volume. If you select "Auto", use [
that output the test tone.
• If you want to stop the test tone, press [RETURN].
For "Default":
Press [ENTER] to reset the "Speaker Configuration", "Channel Level" or "Delay Time"
setting to the default.
4) Press [SETUP] to exit.
Menu
Speaker Configuration Front
Select the desired
speaker to set. Then
Center
change the setting
appropriately by
referring to the
Subwoofer
descriptions.
Surround
Surround Back
Default
Remote control operation
buttons
HDMI Multi(LPCM)
HDMI Multi(LPCM)
Multi Channel
Multi Channel
/ ] to select desired speaker, then use
/ ] to adjust the volume of the speaker
Setting items Options
Large:
Large*
For the large speakers
Small
with strong low frequency
Large*
reproduction capabilities.
Small:
Small/None
For the small speakers
On*
which do not provide
None
strong bass sound.
None:
Large*
No speakers.
Small/None
For "Subwoofer" there is
Large*
only "On" or "None".
Small/None
Select "Default", then
press [ENTER] to reset the
"Speaker Configuration"
setting to the default.
: Displaying the menu
Cancel the menu
• For "Speaker Configuration" setting, the settings of each speaker size may be adjusted
automatically corresponding to each setting. (e.g. If "Front" is set to "Small", you cannot set
"Center", "Surround" and "Surround Back" to "Large".)
• If you connect to 5.1-channel surround system, set "Surround Back" in "Speaker Configuration" to
"None".
• "None" for "Center", "Subwoofer", "Surround" and "Surround Back" is not available for the speaker
setting for the audio signal output from the HDMI OUT jack .
Menu

Channel Level

Tests or sets the
volume for each
speaker.
Descriptions
: Move the cursor
(Up/Down/Left/Right)
35
ENGLISH
Setting items Options
Test Tone: Off*
"Test Tone" is the test
tone which can be
output from the
Manual
speakers so that you
can adjust the volume
for each speaker.
Auto
Front Lch 0 dB to -12 dB
(0 dB*)
Center 0 dB to -12 dB
(0 dB*)
Front Rch 0 dB to -12 dB
(0 dB*)
Surround Rch 0 dB to -12 dB
(0 dB*)
Surround Back Rch 0 dB to -12 dB
(0 dB*)
Surround Back Lch 0 dB to -12 dB
(0 dB*)
Surround Lch 0 dB to -12 dB
(0 dB*)
Subwoofer 0 dB to -12 dB
(0 dB*)
Default
: Confirm the setting : Return to previous menu
Function Setup
Descriptions
Select "Off" to deactivate
the "Test Tone" feature.
Select "Manual", then
press [ENTER] to manually
set the volume for the
desired speaker.
Select "Auto",then press
[ENTER] to automatically
output the test tone from
each speaker.
If you have selected
"Manual" in "Test Tone",
select the desired speaker
to set and adjust the
volume for the selected
speaker.
If you have selected
"Auto" in "Test Tone", test
tone will be output
automatically in order.
Adjust the volume of the
speaker that output the
test tone.
Select "Default", then
press [ENTER] to reset the
"Channel Level" setting to
the default.