Connection To A Device With 2-Channels Of Analog Audio Inputs; Network Connection With Lan - Marantz BD5004 User Manual

ENGLISH
Connections

Connection to a Device with 2-channels of Analog Audio Inputs

audio
Stereo component
AUDIO IN
L
R
Supplied cables used in this connection are as follows:
• RCA audio cable (L/R) x 1
Note
• When connecting to a 2-channel audio stereo device, use the 2ch AUDIO OUT jacks. For software
recorded in multi-channel, analog signals that have been down-mixed into 2 channels are
output.
RCA audio cable
this unit
2ch AUDIO OUT
R L
AC IN DIGITAL OUT COMPONENT VIDEO OUT VIDEO OUT FLASHER
IN OUT
COAXIAL
2ch AUDIO OUT
R L
NETWORK HDMI OUT

Network Connection with LAN

• You can use a disc which offers BD-Live function by connecting the unit to the Internet.
(For BD-Live information, please refer to page 29.)
Telecommunications
equipment (modem, etc.)
LAN
LAN cable
Internet
No supplied cables are used in this connection:
Please purchase the necessary cables at your local store.
Note
• After connecting to the Internet, set up necessary network settings.
• Do not insert any cable other than a LAN cable to the NETWORK terminal to avoid damaging the
unit.
• If your telecommunications equipment (modem, etc.) does not have broadband router
functions, connect a broadband router.
• If your telecommunications equipment (modem, etc.) has broadband router functions but there
is no vacant port, use a hub.
• For a broadband router, use a router which supports 10BASE-T/100BASE-TX.
• Do not connect your PC directly to the NETWORK terminal of this unit.
15
ENGLISH
Hub or broadband router
WAN LAN
5 4 3 2 1
LAN cable
Telecommunications
equipment (modem, etc.)
this unit
NETWORK
AC IN DIGITAL OUT COMPONENT VIDEO OUT VIDEO OUT FLASHER
IN OUT
COAXIAL
NETWORK HDMI OUT
Connections
2ch AUDIO OUT
R L