Tearing Paper; Using The Belt Loop - Intermec PB3 User Manual

Tearing Paper

Using the Belt Loop

PB3 Mobile Printer User's Guide
6 Press the Power button to turn the printer on.
7 Press and hold the Feed button to verify that the paper advances
correctly.
Note: Using the tear bar is the only way to tear the paper. Pulling up
and pulling sideways without using the tear bar can cause a paper jam.
The paper door acts as a tear bar. Pull one edge of the paper against
the tear bar, and then tear down and across against the tear bar to tear
the paper.
The tear bar has sharp edges. Be careful when tearing paper or
when handling the paper door.
1 Place the belt loop over your belt and snap it to secure it.
9