Caller List - Panasonic KX-TGF350C Operating Instructions Manual

Call Display Service
Base unit: MEXITN
Call Waiting Deluxe service options
When a 2nd call is received, you can choose how
to handle the call by selecting an option shown on
the unit display.
Note:
R Your phone service provider may not offer all of
the options (page 38).
Displayed
Function
option
Answer Answers the waiting call,
while keeping the 1st call on
hold.
Hold Holds the waiting call. The
caller will hear the
pre-recorded hold message
played by your phone
service provider.
Announce The caller will hear the
pre-recorded busy message
played by your phone
service provider (for
example, "We are not
available now.") and will then
be disconnected.
Forward Forwards the waiting call to
the voicemail service
provided by your phone
service provider. You must
subscribe to voicemail
service to use this function.
Drop Disconnects (drops) the
current call and answers the
waiting call.
Conference Answers the waiting call and
combines it with the current
call to make a conference
call (3-party call).
Return
Returns to the waiting caller
while keeping the current
call on hold.
Drop caller1 Disconnects (drops) the 1st
call during a conference call.
Drop caller2 Disconnects (drops) the 2nd
call during a conference call.
38
TGF3xxC(en)_1216_ver011.pdf 38
For assistance, visit www.panasonic.ca/english/support
To use Call Waiting Deluxe service
Handset / Base unit
1
When you hear a Call Waiting tone during an
outside call, press MFLASHN.
R The option menu is displayed.
2
MbN: Select the desired option. a MSELECTN
R After selecting "Answer", "Hold", or
"Conference", you can select another
option. a MFLASHN a MbN: Select the
desired option. a MSELECTN
Note:
R To exit from the option menu, wait for 20
seconds.

Caller list

Important:
R Make sure the unit's date and time setting is
correct (page 13).
Viewing the caller list and calling back
Handset / Base unit
1
Proceed with the operation for your unit.
Handset: MCN CID
Base unit: MCIDN
2
Press MCN to search from the most recent call,
or MDN to search from the oldest call.
3
Proceed with the operation for your unit.
Handset:
– To call back, press M
– To exit, press MOFFN.
Base unit:
– To call back, lift the corded handset.
– To exit, press MEXITN.
Note for handset and base unit:
R If the entry has already been viewed or
answered, " " is displayed.
R In step 1, you can also access the caller list as
follows:
Base unit:
MCALL LOGN a MbN: "Incoming call" a
MSELECTN
2014/12/16
N.
19:11:02