Intercom - Panasonic KX-TGF350C Operating Instructions Manual

– between 2 handsets
– between a handset and the base unit
Handset
1
During an outside call, press MMENUN.
2
MbN: "Intercom" a MSELECTN
3
MbN: Select the desired unit. a MSELECTN
4
Wait for the paged party to answer.
R If the paged party does not answer, press
MBACKN to return to the outside call.
5
To complete the transfer:
Press MOFFN.
To establish a conference call:
MMENUN a MbN: "Conference" a
MSELECTN
R To leave the conference, press MOFFN. The
other 2 parties can continue the
conversation.
R To put the outside call on hold: MMENUN a
MbN: "Hold" a MSELECTN
To resume the conference: MMENUN a
MbN: "Conference" a MSELECTN
R To cancel the conference: MMENUN a MbN:
"Stop conference" a MSELECTN
You can continue the conversation with the
outside caller.
Base unit
1
During an outside call, press MINTERCOMN.
When 2 or more handsets are registered:
MbN: Select the desired unit. a MSELECTN
R To page all handsets, press 0 or wait for a
few seconds.
2
Wait for the paged party to answer.
R If paged party does not answer, press
MINTERCOMN to return to the outside call.
3
To complete the transfer:
Place the corded handset on the cradle.
R The outside call is being routed to the
handset.
To establish a conference call:
Press MCONFN.
R To leave the conference, place the corded
handset on the cradle. The other 2 parties
can continue the conversation.
R To put the outside call on hold, press
MHOLDN. To resume the conference, press
MCONFN.
For assistance, visit www.panasonic.ca/english/support
TGF3xxC(en)_1216_ver011.pdf 17
Making/Answering Calls
2014/12/16 19:11:00
17