Orientation Confirmation; Color Toner Empty Action - Kyocera TASKalfa 7550ci Operation Manual

Orientation Confirmation

Select whether to display a screen for selecting the orientation of the originals to be placed on the platen when
using the following functions. (For more information, refer to page 4-9 for Original Orientation.)
• Zoom (XY Zoom)
• Duplex
• Margin/Centering originals
• Border erase
• Combine mode
• Memo mode
Use the procedure below to select the default Orientation Confirmation setting.
1
Press the System Menu key.
2
Press [Common Settings] and [Change] of Orientation Confirmation.
3
Select the default for [Off] or [On].
4
Press [OK].

Color Toner Empty Action

Select whether printing is prohibited or the Print in Black and White setting is used for printing once the color
toner runs out.
Use the procedure below to specify the action performed when there is no color toner.
1
Press the System Menu key.
2
Press [Common Settings], [
3
Select [Stop Printing] or [Print in Black & White].
4
Press [OK].
IMPORTANT: You cannot change the setting to black and white printing by selecting [Print in Black & White]
once the color toner runs out. If you want to use [Print in Black & White], specify the action before the color toner
runs out.
Once the color toner runs out, the machine continues printing in black and white up to 2,000 pages in A4/Letter
size.
Function Defaults
Defaults are the values automatically set after the warm-up is completed or the Reset key is pressed.
Set the defaults for available settings such as copying and sending. Setting the frequently-used values as
defaults makes subsequent jobs easier.
IMPORTANT: If you want to enable the changed defaults immediately, move to the function screen and press
the Reset key.
• Page numbering
• Booklets
• Staple/Punch (optional feature)
• 2-sided/Book Original
• Text Stamp
• Bates Stamp
] and then [Change] of Color Toner Empty Action.
9-16
Default Setting (System Menu)