Using The Wind Cut - Samsung NX10 User Manual

Recording a Movie

Using the Wind Cut

By using the wind noise removal function, you can
remove some surrounding noise in addition to the wind
noise.
In Shooting mode, press [MENU].

1
Select Shooting3 (
2
an option.
Pause while recording a movie
By using the pause function, you can shoot only
desired scenes into one file without generating several
movie files.
To pause during the recording, press [
• To continue on recording, press [
• While the Fader function is used, it may takes longer
to save images.
) → Wind Cut →
3
] again.
].
• H.264 (MPEG-4 part10/AVC) is the latest video
coding format established in 2003 collaboratively
by ISO-IEC and ITU-T. Since this format uses a high
compression rate, more amount of data can be saved
to the same storage media.
• When using a slow writing memory card, your
movie's recording can be interrupted since it can not
process at the rate the video is being saved.
In this case, you can solve this problem either by
replacing with a faster memory card or by reducing
the video size.
• When the image stabilizer option is set in shooting a
movie, the image stabilizer sound can be recorded.
• When the capacity of one file in recording exceeds
4GB, the movie recording will be stopped
automatically. In this case, the recording can be
continued by starting new recording.
• When formatting a memory card, it is always
recommended to format by using this camera.
When the format is run in other product or PC, it is
possible to damage images or to cause a change in
the capacity of memory card.
• If the camera lens is removed while recording a movie,
the recording will be interrupted. Do not change the lens
while recording.
•
When taking a movie, please be careful since the
operational sounds such as zoom sound and button
sound can be recorded.
• When changing the shooting angle of camera is
suddenly changed while in shooting a movie, it may
not be possible to take the images accurately. When
recording movies, it is recommended to use tripod. In
that way, you can minimize the camera shake.
• When shooting a movie, only the Multi AF function is
supported. Hence, it is not possible to use a focus area
setting function like Face Detection AF.