Samsung NX10 User Manual page 43

Using the Aperture Priority, Shutter Priority, or Manual mode
Using the bulb exposure
By using the bulb exposure, you can set the shutter
speed as long as you want.
1
Rotate the mode dial to M.
2
Rotate the dial and set the shutter speed
to Bulb.
• Bulb exposure indication appears next to
43
3
To adjust the aperture value, press and
hold the [EV] while rotating the dial.
4
Align your subject in the frame and half-
press [Shutter] to focus.
5
Press [Shutter] to take a photo.
• The exposure time continues until you
the shutter speed of 30"(seconds).
14
M
SF
RGB
OIS
Bulb F3.5 0173
00'00''
finish holding the [Shutter]. Press and
hold the [Shutter] for desired time. As
soon as you finish holding the [Shutter],
the shooting is complete.
ISO
• For the image stabilization at the time of taking
pictures in the bulb exposure mode, it is
recommended to use a reliable tripod or shutter
release (purchased separately).
• If you use a long shutter speed, the time taken
to save images gets longer as well. This is not a
problem of the product and you do not need to
replace the battery.
• When taking pictures for a long time by using the
bulb shot function, we recommend to use the camera
after fully charging the battery.
• When taking pictures in the mode of bulb exposure,
noise can occur in case of long-time exposure.
Hence, it is recommended to set the noise reduction
function.
The noise reduction function operates when the
shutter speed is set longer than 1 seconds.
• When using the bulb exposure function, the
successive shooting function can not be used.
• The ISO speed cannot be set to AUTO when using
the bulb exposure function.