Image Compression; Sharpness; Edge Erase; Maximum Attachment Size - Fuji Xerox DocuCentreS2520 User Manual

8 Tools
You can select from [Low], [Normal], [Higher +1], [Higher +2], and [Higher +3]. [Normal] is
the standard suppression level, [Low] is the lowest suppression Level, and [Higher +3] is the
highest suppression level.
[Normal] is set at the time of factory shipment.
For more information, refer to [Copy Settings] : "Back. Suppression Level" (P.152)

Image Compression

Used to set the file compression ratio when document is scanned.
You can select [Higher +2], [Higher +1], [Normal], [Lower -1], or [Lower -2]. [Higher +2] is the
highest compression ratio, and [Lower -2] is the lowest compression ratio.
[Normal] is set at the time of factory shipment.
Note

Sharpness

Sets the default sharpness value displayed for [Sharpness].
You can select [Soften +2], [Soften +1], [Normal], [Sharpen +1], or [Sharpen +2].
[Normal] sets the sharpness at the standard level; [Soften +2] sets it lower; [Sharpen +2] sets
it higher.
[Normal] is set at the time of factory shipment.
For more information, refer to [Copy Settings] : "Sharpness" (P.151)

Edge Erase

8
Sets the default value displayed for [Edge Erase]. Setting a value for this menu item erases
the black shadows created around the edges of the paper when scanning with the
document cover open.
You can set values between 0 and 10 mm (in 1 mm increments).
[2 mm] is set at the time of factory shipment.
For more information, refer to [Default Settings] > [ID Card Copy] > "Edge Erase" (P.153).

Maximum Attachment Size

Sets the maximum file size for an e-mail attachment.
You can set values between 2 and 20 MB (in 1 MB increments).
[20 MB] is set at the time of factory shipment.

Recipient Confirmation

Sets whether to confirm the recipient information before sending data.
You can select [On] or [Off].
[Off] is set at the time of factory shipment.
156
• Selecting [Higher+2] reduces file size, but also reduces image resolution.