Fuji Xerox DocuCentreS2520 User Manual page 197

Symptom Possible Cause
Copies are out of Are the document feeder's
position or document guides misaligned?
crooked.
Have you mounted the tray
securely?
Copies have Is the paper damp?
missing parts in
them.
Is the paper in the tray
creased or wrinkled?
Are you copying a cut-and-
pasted or creased document?
Striped patterns Are you attempting to make
appear in copies. an enlarged copy of the
document with a too large
enlargement factor?
The printout is The paper is damp.
light (faded,
The drum cartridge has
unclear).
deteriorated or been
damaged.
The toner cartridge has run
out of toner.
Black spots The drum cartridge has
appear in copies. deteriorated or been
damaged.
Image Quality Problems
Remedy
Place the document correctly, moving the
document guides into contact with the edges
of the document.
Refer to "Placing Document" (P.96).
Mount the tray by inserting it securely all the
way into the machine.
Refer to "Loading Paper in Trays 1 to 4 (Optional)"
(P.87).
Damp paper creates missing parts or unclear
copies. Replace it with paper from an
unopened pack.
Remove any problematic sheets, or replace
the paper with paper from an unopened
pack.
Cut-and-pasted or creased parts of the
document may not be making proper contact
with the document glass. Place a stack of
white paper on top of the document to bring
it into proper contact with the document
glass.
When making enlarged copies, some
enlargement factors can create striped
patterns. Adjust the copy enlargement factor.
Refer to "Reduce/Enlarge" (P.110).
Replace the paper with new paper.
Replace the drum cartridge with a new one.
Refer to "Replacing the Drum Cartridge" (P.182).
Replace the toner cartridge with a new one.
Refer to "Replacing the Toner Cartridge" (P.179).
Replace the drum cartridge with a new one.
Refer to "Replacing the Drum Cartridge" (P.182).
12
197