Tft-Pcb Eeprom Flashram Up; Reading Of Risc Version; Procedure For Upgrading Risc Firmware - Nikon D70 VBA10401 Repair Manual

9-6. TFT-PCB EEPROM flashram up

・Provide the power for the camera via AC adapter.
・Set "PTP" mode by Setup menu.
・Connect the camera and PC via USB cable.
・Click "TFT PCB EEPROM FLASHRAM UP" of the menu on screen.
・The adjustment starts. When it is completed, "OK" is displayed.

9-7. Reading of RISC version

・Provide the power for the camera via AC adapter.
・Set "PTP" mode by Setup menu.
・Connect the camera and PC via USB cable.
・Click "READING OF RISC VERSION" of the menu on screen.
・RISC version is displayed.

10. Procedure for upgrading RISC firmware:

・ After preparing the CF card, copy the latest version ( XXXX. BIN) into the root directory.
・ Insert the CF card, and select "FIRMWARE VERSION" from the SETUP menu.
・ Follow the instructions on screen for version upgrading. It takes approx. 3-4 minutes.
・ Check the version of firmware by "RISC VERSION" of the image adjustment software.
Note:
In case incorrect files are included in the CF card, the details for upgrading are not displayed even
after selecting "FIRMWARE VERSION" from the SETUP menu.
- Ａ56 ･ -
VBA10401-R.3623.A