Disassembly of Top cover unit
SB upper case
・ Press the pop-up lever A part of the top cover unit so that the built-in SB pops up.
・ Take out 2 screws (#631).
・ Push from beneath the hooking lever of the SB upper case as shown in Fig.1 . Then slide 2 hooks in the
direction of the arrow to remove the lever.
・ Deactivate pop-up of the SB lower case unit, and remove the SB upper case. ( Fig.2)
Pop-up lever A part
#631×2
Lighting unit PCB
Unsolder Shield wires
Hooking lever
Fig.1
Tape (#709)
- D8 ・
SB lower case unit
-
VBA10401-R.3623.A
SB upper case
Fig.2
Red: Lighting unit control PCB
White: Lighting unit control PCB