Yanmar 4JH45 Operation Manual page 73

12/05
Checking and Adjusting Remote
Control Cables
Adjusting Engine Speed Remote
Control Cable
Ensure the control lever in the ECU box
side moves to the high-speed stop position
and low-speed stop position when the
remote control lever is moved to HIGH and
then to LOW.
Figure 3
3 2
7
5 4
Figure 7
1 – Cable
2 – Adjustment screw
3 – Control lever
4 – High-speed stop pin
5 – Low-speed stop pin
6 – High-speed stop position
7 – Low-speed stop position
1. To adjust, loosen the adjustment screw
(Figure 7, (2)) for the remote control
cable in the ECU box and adjust.
2. Adjust the low-speed stop position
(Figure 7, (7)) first and then adjust the
high-speed stop position
(Figure 7, (6)), with the adjustment
screw on the remote control lever
(Figure 7, (3)).
6
1
056903-01X00
JH Series Operation Manual
PERIODIC MAINTENANCE
Adjusting Clutch Remote Control Cable
KM35P
Figure 8
KMH4A
2 1
Figure 9
1. Ensure that the remote control lever
(Figure 8, (2)) or (Figure 9, (2)) moves
to the correct position when the remote
control handle is in the NEUTRAL,
FORWARD and REVERSE positions.
Use the NEUTRAL position as the
standard for adjustment.
2. To adjust, loosen and retighten the
cable fitting (Figure 8, (1)) or
(Figure 9, (1)).
3
2
1
026101-00X01
3
057453-00X00
67