Yanmar 4JH45 Operation Manual page 30

PRODUCT OVERVIEW
Setup screen access and control
(Setting the temperature and pressure units and others)
Use the buttons on the bottom of the LCD
display to set the instrument panel.
Press the left button to switch between
displays.
Press and hold both buttons until "SET
UP" appears.
Press the left button to set the units for
the temperature and pressure display.
Setting the temperature and pressure
units
The display says "UNIT".
Next, press the right button to select
Metric units (°C, BAR). The display
says "METRIC".
Press the left button to switch to
Imperial units (°F, PSI). The display
says "ENGL".
Press the right button to select and go
back to the "UNIT" screen.
Press the left button and go to the next
screen "FUEL".
Confirm that the display indicates "FUEL".
Pressing the right button displays the fuel
tank level setting screen.
24
Figure 3
1
4 1
Select
Figure 12
JH Series Operation Manual
2
Scroll
2 3
Scroll Select
Imperial Metric
057180-00EN00