Yanmar 4JH45 Operation Manual page 32

PRODUCT OVERVIEW
Selection of the display setting
The following indicators can be
displayed on LCD by this setting.
TH ON
TH POS
TH OFF
Ld ON
ENG Ld
Ld OFF
FR ON
FL RT
FR OFF
AP ON
AIR PRS
AP OFF
FT ON
FL TMP
FT OFF
RETURN
The display indicates "dISPLAY".
You can select to the next setting by
pressing the left button.
Press the right button to select the
indicator.
Press the right button to display the
setting screen.
Press the left button to toggle between
On/Off.
Press the right button to select the
setting.
Press the left button and go to the next
screen "ENG Ld".
Setting of the next indicator.
Repeat the same procedure to set other
indicators.
When "RETURN" is indicated on the
screen, press the right button to exit
the "dISPLAY" mode.
Press the right button when "EXIT" is
shown on the screen to exit the setup
mode.
All LCD light up for a while, then the
screen returns to hour meter.
26
Throttle position
%
Engine load
%
Fuel flow rate
L/h or Gal/h
Intake air pressure
Bar or PSI
Fuel temperature
degC or degF
Return to dISPLAY
Figure 5
1
Select
5 2
Select
Scroll
Figure 14
Figure 6
6
057183-00EN00
Figure 15
JH Series Operation Manual
3 4
Scroll Select
057182-00EN00
7
057184-00EN00