Table of Contents
Advertisement
AUTOMATIC MODE SETTINGS
Deleting zone settings
1
Select "SET ZONE", and then tilt the
joystick lever to c.
The zone setting screen will be displayed.
Select "ZONE No.", and then tilt the
2
joystick lever to c.
The "ZONE No." setting will flash.
·ZONE
No.
TITLE: 0000000000000000
SET LEFT LIMIT
SET RIGHT LIMIT
DELETE
DEFAULT SPEED :
RUN
BACK
Tilt the joystick lever to j or l to select a
3
zone number to be deleted, and then tilt it
to d.
4
Select "DELETE", and then tilt the joystick
lever to c.
The selected zone will be deleted.
Select "BACK", and then tilt the joystick
5
lever to c to complete the setting.
English
:
001
001
F Automatic restore standby time
settings (FUNCTION IDLE)
Select "FUNCTION IDLE", and then tilt the
1
joystick lever to c.
The "FUNCTION IDLE" setting will flash.
PRESET POSITION
SEQUENCE
TOUR
AUTO PAN
SET ZONE
·FUNCTION IDLE:OFF
FUNCTION
BACK
Tilt the joystick lever to j or l to set the
2
value, and then tilt it to d.
Available settings: OFF, 001–255
3
Select "BACK", and then tilt the joystick
lever to c to complete the setting.
G Automatic restore function
settings (FUNCTION)
1
Select "FUNCTION", and then tilt the
joystick lever to c.
The "FUNCTION" setting will flash.
PRESET POSITION
SEQUENCE
TOUR
AUTO PAN
SET ZONE
FUNCTION IDLE:OFF
·FUNCTION
BACK
Tilt the joystick lever to j or l to select
2
the setting, and then tilt it to d.
Available settings: OFF, TOUR001–004,
3
Select "BACK", and then tilt the joystick
lever to c to complete the setting.
- 39 -
:OFF
:OFF
SEQ001–004, PAN001–004,
PRE001–080
Advertisement
Table of Contents
